MIDMARK VMS® WALL MOUNT

 

Our most popular anesthesia machine is available in a wall-mount configuration.

• Includes occlusion valve and starter pack of Sodasorb^®LF
• Simple to install
• Small surface area design
• Pivot arm rotates 130° and extends to 8″ from the wall
• Accepts VIP 3000^®or TEC 3 vaporizers (vaporizer sold separately)

 

Product Specification

VMS^® Wall Mounted

Overall width: 12″ (30.48 cm)

Swing radius: 6.75″ (17.14 cm)

Distance from wall: 8.75″ (22.23 cm)

Wall footprint: 22″ x 12″ (55.88 x 30.48 cm)

Pivot arm rotation: 130 degrees

Shipping weight: 26 lbs

Midmark VMS

 

The VMS^® small animal anesthesia machine is a long-time favorite of veterinary professionals. It is designed for safe, simple and controllable small animal inhalation anesthesia.

• Includes Occlusion Valve with safety relief to prevent unsafe build-up in the anesthesia circuit/patient
• Negative Pressure Relief Valve—opens to provide room air to patient if contents of breathing bag are depleted
• Dual view oxygen flowmeter featuring a glass flowmeter tube that reads from 0.2-4 LPM – quickly switch from standard to magnified view at the touch of a finger
• Easy to view inhalation/exhalation valves
• Oxygen flush
• 1500 cc CO₂absorber with starter pack of Sodasorb^® LF
• Scavenging/adjustable pressure limiting (APL) valve
• Breathing circuit pressure gauge
• 15 mm and 22 mm diameter corrugated breathing circuits
• One and two-liter breathing bags
• Portable stand with 5-leg spider base and casters
• Accepts Midmark VIP 3000^®and TEC 3 vaporizers (vaporizer sold separately)

 

Product Brochure

Midmark Anesthesia Brochure.pdf

 

Product Specification

VMS^® Stand

Floor to top of anesthesia machine: 54″ (137.15 cm)

Overall width: 12″ (30.48 cm)

Floor footprint: 27″ (68.58 cm)

Shipping weight: 42 lbs

Flowmeter with humidifier.

 

This oxygen delivery system will attach to any cage.

• 15LPM flowmeter
• Bubble humidifier (J0653) add water or saline
• Attaches to cage bars via two “U” bolts or wide flat washers
• Choices of male DISS fitting or male Ohio quick release for oxygen hose connection to flowmeter
• Oxygen tubing 7 ft (J0655)
• Red rubber catheter 14fr (J0347CC) for nasal insertion or “blow by”, connection adaptor included

 

J0953 Male DISS fitting

J0533e Pressure Regulator

 

For E-type cylinder with pin indexed yoke and male DISS connector. Also has pressure gauge indicating remaining cylinder contents. CGA 870

OxyVet III PLUS Oxygen Concentrator

 

The most compact and lightweight 10 litre oxygen concentrator suitable for anesthesia use.

• Energy efficient system as it does not require an oxygen cylinder
• Easy to use interface with clear arrangement of functions and monitoring information
• Visual and audible alarms ensure patient safety (low oxygen concentration, power failure, pressure drop or device malfunction)
• Very low audible levels (60 dbA)
• Additional oxygen outlet enables the use of all common filling stations (in combination with optional storage)
• Adjustable fl ow rate: 2–10 l/min
• Oxygen concentration: 96 %
• Outlet pressure: 1.38 bar ± 0.07 bar
• Dimensions (in cm): L 34 x W 30 x H 62
• Weight: 19 kg

 

Item No.

213177 OxyVet III PLUS Oxygen Concentrator

213176 Bubble Humidifier

• Humidifies oxygen prior to patient delivery